U.S. Off Road
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Total add-ons:
Do you want to add a winch to your FJ Cruiser but not a heavy full replacement bumper? You are not alone. Full replacement bumpers are 100-150+ lbs, force suspension upgrades and are expensive. Keep your stock bumper cover, classic FJ looks and your MPG with the installation of this winch mount within and behind the stock bumper cover.
Please keep in mind that if you select a winch and need everything shipped outside of the lower 48 states there could be additional shipping charges. Contact us to verify shipping charges if that is the case.
Designed and made in Texas!
CNC Laser cut – clean and precise
1″ wide shackle mounts are drilled .900″ ID for .875″ OD or smaller pins which is common for a 3/4″ shackle. Pin sizes can vary, especially Chinese made shackles. We offer quality Van Beest shackles which will fit our shackle mounts.
Mounting ear reinforcement plates for maximum clamping force.
A/C line notch to help safely clear A/C lines
Lighter than most aftermarket bumpers at 55.5 lbs.
Built to last. Winch tubs are .250″ steel with a .125″ fascia for a total of .375″ of A36 steel protection up front.
Full height front and rear winch tub with ample drainage.
Reinforced lower fascia with 3 gussets, adds bashplate protection.
Will accept most winches with industry standard 10″ x 4.5″ bolt pattern.
Works with either roller fairleads or synthetic style hawse.
Light tabs to accommodate most cube style (3″) lights such as our Sirius Pro Series LED’s.
Will permit the use of the OEM brush guard.
We offer powder coating in black and silver in a very durable textured powder coat. If you order powder coat then we media blast the winch mount and shoot one coat of zinc primer then two or more coats of powder. Please keep in mind that even though we go to great lengths to protect the coating we are not responsible for shipping damage to any coatings.
Expect a 7-10 business day delay in shipping if you want your winch mount coated.
Please read the FAQ, Install Docs and the articles below.
IMPORTANT INFORMATION
Installation Videos
Installation Docs
Winch Fitment
Winch Selection
Paint/Coatings
Suspension Article
Customer Install Photos
WEIGHT EXAMPLE
Winch mount bumper: 55.50 lbs
Winch with no rope: 52 lbs
85′ x 3/8″ synthetic rope: 3.6 lbs
Aluminum hawse: 1.5 lbs
Coating and fasteners: 1 lb
Total weight: 113 lbs
Frequently Asked Questions:
Does the winch mount come with a winch, fairlead or shackles?
No it does not. Bare steel winch mount only (unless you select powder coat). It does include the 2 12mm bolts and washers you will need though.
Optional shackles and lights can be added to your order. Fairleads and hawse typically come with a winch.
Do you ship outside of the United States? If so, how much is shipping?
Yes, we ship Internationally. Just add what you want to the Cart and obtain a shipping quote there.
How much does it cost to ship domestically?
We ship our Winch Mounts via UPS here in the 48 states and Canada.
Add the product to your cart then go to your cart, there you will be given an opportunity to receive a shipping quote based on your address.
Which winches fit this mount?
Just about any winch will work. Read the technical article above for a more in depth answer. The mount uses a standard 10" x 4.5" bolt pattern so any winch will fit and there is plenty of room in the mount itself.
The rare issue is the bracing with the hood release behind the FJ grille and above the winch and the A/C line on 2010 and up models.
Read the installation docs above for more information.
What winch rating do you suggest for this application?
That is a big question. Unless you drive an FJ40 or a CJ/TJ you better go with 9000 lbs or larger.
Read the Winch Selection article above for more insight.
Does the front end need to be lifted after installing this mount and a winch?
Short answer is maybe. Read our Suspension article in the Tech section above for more information. Typically you will see a 3/8" to 1/2" drop by adding the mount (57lbs) and a winch (75-90lbs). This is still a much lighter alternative to a full bumper replacement (75-150lbs without a winch!).
In our testing we noticed no difference in how the FJ drove after installation on a stock vehicle.
Having said that, because the FJ comes from the factory with some rake (front lower than rear) it wouldn't hurt to lift it a bit to level things out. Read suspension article above about using the Bilstein adjustable shocks to achieve a more level stance and much better ride vs stock for a reasonable price.
How hard is it to install?
Not really hard at all. It takes more time to prep and paint/coat the mount than it does to install (we suggest our optional powder coat).
Figure 3 - 6 hours depending on the equipment you are installing (just the winch mount, winch, lights, etc?) your abilities and how big of a hurry you are in.
You can read the install docs above and watch our customer supplied install videos for more info.
Will this work with suspension and body lifts?
Our bumpers work fine with any suspension lifts but will NOT work with body lifts as our bumper needs to line up with the bodywork but attaches to the frame. A body lift moves the bodywork in relationship to the frame.
Share
I didn’t want to add a ton of weight to the front of my FJ. I am more of a backroads and occasional obstacle type explorer. This bumper fit the bill perfectly. I called US Offroad with a question and they were quick to answer and help. The welds are excellent quality and honestly it’s hard to beat the price for what you are getting with this product. I can’t recommend it enough. Plan to add some lights and shackles soon.
...
Arrived perfect
Everything I wanted appreciate the quick arrival
Good Business
Absolutely love this mount. Looks great and I don't have all that added weight from an entire bumper. Quality is amazing. Very well built. Super beefy. Super easy installation. Bolts right on.
Love the new winch mount fitted with the OEM bumper. Very well made and bolted right on!
Fit and finish were perfect went on fj perfectly. I'm 86 years old and if I can mount it any one can
I had been planning on adding a winch to my new to me FJ since I got it 4 months ago but hated to spend the money. I will say that this plate seems to be the favorite of the FJ folks on the forums. And now I see why. This plate is heavy duty, well built and looks good to boot. It really improves the look of the FJ front. I looked at this one, a cheaper one that I didn't like and one other that appeared similar to this but was about twice the cost. As a senior on a fixed income I have to make sure I get my money's worth when I make a major purchase. This plate definitely fits the bill on that. It was an easy install. All the holes lined up perfectly with the only exception being the two arms that go alongside the frame for the extra bolts had gotten slightly squeezed during shipping and after a few whacks with a hammer it went on perfectly. I am totally satisfied with this plate. Unless you're going with a full replacement aftermarket bumper this is the one you want. Trust me, I did the research. Also, if you're planning on installing pod lights you should go ahead and get them and do it during install. It will be much more difficult later. In summary, if you're going with a hidden winch, this is the best option available.
The instalation was straight forward with no surprises. The fit and finish are great. I appreciate the factory look and less weight than a traditional winch mount.
Clean welds, no burrs on any of the holes or edges. Fit perfectly and looks like a factory mount. I received bare steel and colour matched my FJ and it took very little prep work to make ready for paint. 100% recommended.