U.S. Off Road
Do you want to add a winch but not a full replacement bumper to your Tacoma? You are not alone. Full replacement bumpers are 100-150+ lbs, force suspension upgrades and are expensive. Keep your stock bumper cover, factory looks and your MPG with the installation of this winch mount within and behind the stock bumper cover.
DEC 26: We are still waiting on production, should be any day now Obviously Christmas has delayed production. You can still place an order and back orders will be shipped as they are received once we have inventory on hand. (we ran out on Dec 9).
Be sure to add a winch, lights and shackles to your order!
Please keep in mind that if you select a winch and need everything shipped outside of the lower 48 states there could be additional shipping charges. Contact us to verify shipping charges if that is the case.
- Designed and built in Texas!
- CNC Laser cut – clean and precise
- 1″ wide shackle mounts are drilled .900″ ID for .875″ OD or smaller pins which is common for a 3/4″ shackle. Pin sizes can vary, especially Chinese made shackles. We offer quality Van Beest shackles which will fit our shackle mounts.
- Mounting ear reinforcement plates for maximum clamping force.
- Lighter than most aftermarket bumpers at 69 lbs.
- Built to last. Winch tubs are .250″ steel with a .125″ fascia for a total of .375″ of protection up front!
- Full height front and rear winch tub with ample drainage.
- Reinforced lower fascia with 7 gussets, adds bashplate protection up front.
- Will accept most winches with industry standard 10″ x 4.5″ bolt pattern.
- Works with either roller fairleads or synthetic style hawse.
- Light tabs to accommodate most cube style (3″) lights such as our Sirius Pro Series LED’s.
We offer powder coating in black and silver in a very durable textured powder coat. If you order powder coat then we media blast and shoot one coat of zinc primer then two or more coats of powder. Please keep in mind that even though we go to great lengths to protect the coating we are not responsible for shipping damage to any coatings.
Expect a 7-10 business day delay in shipping if you want your winch mount coated.
Please read the FAQ and articles, including install docs, below.
IMPORTANT INFORMATION
Installation Videos
Installation Docs
Winch Fitment
Winch Selection
Paint/Coatings
Suspension Article
Customer Install Photos
WEIGHT EXAMPLE
Winch mount bumper: 63.00 lbs
Winch with no rope: 52 lbs
85′ x 3/8″ AmSteel rope: 3.6 lbs
Aluminum hawse: 1.5 lbs
Coating and fasteners: 1 lb
Total weight: 121 lbs
----------------
Frequently Asked Questions
Does the winch mount come with winch, fairlead/hawse or shackles?
No it does not. Bare steel winch mount only (unless you select powder coat).
Optional shackles and lights can be added to your order.
Fairleads and hawse typically come with a winch, we sell these as well.
Do you ship outside of the United States? If so, how much is shipping?
Yes, we ship Internationally. Just add what you want to the Cart and obtain a shipping quote there.
How much does it cost to ship domestically?
We ship our Winch Mounts via UPS here in the 48 states and Canada.
Add the product to your cart then go to your cart, there you will be given an opportunity to receive a shipping quote based on your address.
Which winches fit this mount?
Just about any winch will work as the Tacoma has plenty of room. Read the winch fitment technical article above for a more in depth answer.
The mount uses a standard 10" x 4.5" bolt pattern so any winch will fit and there is plenty of room in the mount itself.
The rare issue is the bracing with the hood release behind the grille and above the winch.
Read the installation docs above for more information.
What winch rating do you suggest for this application?
That is a big question. Unless you drive an FJ40 or a CJ/TJ you better go with 9000 lbs or larger.
Read the Winch Selection article above for more insight.
Does the front end need to be lifted after installing this mount and a winch?
Short answer is maybe. Read our Suspension article above for more information.
Typically you will see a 3/8" to 1/2" drop by adding the mount (57lbs) and a winch (75-90lbs).
This is still a much lighter alternative to a full bumper replacement (75-150lbs without a winch!). In our testing we noticed no difference in how a Tacoma drove after installation on a stock vehicle.
Having said that, because the Tacoma comes from the factory with some rake (front lower than rear) it wouldn't hurt to lift it a bit to level things out. Read this article about using the Bilstein adjustable shocks to achieve a more level stance and much better ride vs stock for a reasonable price.
How hard is it to install?
Not really hard at all. It takes more time to prep and paint/coat the mount than it does to install (we suggest our optional powder coating).
Figure 3 - 6 hours depending on the equipment you are installing (just the winch mount, winch, lights, etc?) your abilities and how big of a hurry you are in.
You can read the install docs above and watch our customer supplied install videos for more info.
Will this work with suspension and body lifts?
Our bumpers work fine with any suspension lifts but will NOT work with body lifts as our bumper needs to line up with the bodywork but attaches to the frame. A body lift moves the bodywork in relationship to the frame.
